Loosening Fasteners: Dealing with stubborn nuts and bolts

Posted by on Oct 29, 2010 in Building & Construction | 4,917 comments
Share

Fasteners are usually designed in a fashion to stay light and firm in place until you would like to remove them. However, there may be times when they will become loose due to vibration. You may also face situations where you want them to come loose but they won’t come at all. Yes! Fasteners can give you tough times.

You may require facing problem with fasteners because some times a frozen bolt or nut can sheer off, round off or even break your tools. So what to do in order to loose fasteners? Is there a technique that helps you deal with stubborn nuts and bolts? Well, you would be happy to know that there are many ways to loosen a bolt or nut when it troubles you a lot.

This article will get you acquainted with basics on nuts, Screw, Bolts etc and some fabulous techniques on lessening fasteners.

First, it is important to understand that clock wise direction (right) is to lighten a fastener and counter clockwise (left) is to loosen it. However, this is not the case with left handed thread. You need to look of an “L” on the top portion of the bolt or stud in order to identify left handed threads.

The techniques stated below are applicable to bolt, nuts utilized in metal and plastic applications. These are not applications. These are not applicable for staples, screws and nails used in wood. It is also very important use a tool on bolt ends of the fastener in order to hold it in place or turn it.

Technique to deal with stubborn nuts and bolts:

•    Oil: Apply oil in order to loosen frozen or rusted connection.

•    Use hammer: Tap with a hammer on the nut or bolt. Make sure you do not damage the head of the nut/ bolt.

•    Tighten: Tighten the nut or bolt a little and then loosen.

•    Impact: Try using an impact wrench. This may be pneumatic, electric or manual.

•    Torch: You need to heat the fitting via using a torch. Take special care that there is no damager of fire or damage to the material.

•    Whack: Now, whack the wrench’s far end via using a mallet that will work as an impact wrench.

•    Longer wrench: It is important to utilize a longer wrench in order to apply a “cheater bar”. This will offer you better leverage.

•    Install: You should cut the fasteners out in order to install new ones.



4,917 Responses to “Loosening Fasteners: Dealing with stubborn nuts and bolts”

  1. free ipad says:
    February 22, 2011 at 5:37 am

    I verify every few days to take a look at your writings and its nice to have a look at some innovative writings, i left a connection back to my twitter account in case you ever would like check out mine

  2. Keyboard Stand says:
    February 22, 2011 at 4:09 pm

    This is a another nice article for anyone who wants to know more about this topic. You put a new spin on a topic thats been discussed about for years. Best of luck for next article.

  3. replica pens says:
    February 27, 2011 at 12:43 pm

    Low cost Quality custom printed pens and pencils. replica pens Great prices on these quality writing instruments.

  4. Articulos says:
    March 5, 2011 at 7:20 am

    Thanks for all of the labor on this blog. My aunt take interest in conducting internet research and it is easy to understand why. My partner and i know all of the compelling means you convey helpful strategies through your web blog and as well as strongly encourage contribution from website visitors on the subject while my princess has been learning so much. Take advantage of the remaining portion of the new year. You are carrying out a fabulous job.

  5. diflugan says:
    March 16, 2011 at 11:50 pm

    You gave tremendous positive points regarding the stubborn nuts and loosening fasteners. I did a search on the topic and found most peoples will agree with your blog.

  6. 包二奶 says:
    March 17, 2011 at 5:24 am

    I would just like to let u know how much I learn from your website that i Bookmarked . be back fast for some more good articles!
    Post something more on Loosening Fasteners

  7. Tricor says:
    March 17, 2011 at 3:02 pm

    This is agreat article about dealing with stubborn nuts & bolts.
    Thanks for sorting this out for us.

  8. hho fuel kits says:
    March 17, 2011 at 8:03 pm

    I have been reading this website for a few weeks now. this article about Loosening fasteners is very good, with solid information. BTW, I love your blog design as well. I liked reading it and hopefully you will write more in a few days. Do you have a newsletter? If not I would request you to start this service soon, so that we can get the updates timely.
    Thanks

  9. Susy Sadee says:
    March 17, 2011 at 10:54 pm

    Order handmade cards and keep in contact with and thank consumers. Unit card producing is comparatively cheap, but be sure you research diverse Minute Card Businesses before purchasing.
    This article about Loosening Fasteners is great and very helpful.

  10. Doğum Kontrol Yöntemleri says:
    March 18, 2011 at 7:11 am

    Very useful information about loosening generators. thankyou so much.

  11. Jang Geun Seuk says:
    March 18, 2011 at 10:43 am

    hey nice info on stubborn nuts and bolts.. really thanks

  12. köpek maması fiyatları says:
    March 18, 2011 at 2:10 pm

    thanks for this great work on loosening fasteners

  13. James Wahs says:
    March 19, 2011 at 12:27 am

    I wish more people would write blogs like this that are really fun to read. With all the fluff floating around on the net, it is rare to read a blog like this instead especially somethign so useful abot lossening fasteners.

  14. brian says:
    March 19, 2011 at 6:31 am

    I heard something about loosening fasteners today on a network news program.

  15. jhj says:
    March 19, 2011 at 9:41 am

    this post on loosening fasteners has helped me a lot

  16. Tegretol order cod says:
    March 19, 2011 at 11:42 am

    I feel like you could probably teach a class on how to make a great blog. This is fantastic! I have to say, what really got me was your design. You certainly know how to make your blog more than just a rant about an issue. Youve made it possible for people to connect. Good for you, because not that many people know what theyre doing. very well written stuff on loosening fasteners, would like to hear more. thanks.

  17. Samuel Yeast says:
    March 19, 2011 at 1:19 pm

    I really like this post on loosening fasteners

  18. aspartame dangers says:
    March 19, 2011 at 4:18 pm

    Thanks for sharing loosening fasteners facts.

  19. Mora Benadom says:
    March 19, 2011 at 6:47 pm

    This is a really great blog on Loosening Fasteners. Thx to the auther

  20. Emonomild says:
    March 19, 2011 at 10:37 pm

    Thanks for posting on Loosening Fasteners

  21. Javier Miralles says:
    March 19, 2011 at 10:55 pm

    I really liked reading your post on Loosening Fasteners!. Quallity content. With such a valuable blog i believe you deserve to be ranking even higher in the search engines :)

  22. Marcos Shannonhouse says:
    March 20, 2011 at 8:32 am

    this has all while using usefull data necessary on Loosening Fasteners.

  23. watch online tv free says:
    March 20, 2011 at 10:31 am

    There is obviously a lot to know about Loosening Fasteners. I think you made some good points in Features also. Keep working ,great job!

  24. Fryzury says:
    March 20, 2011 at 9:35 pm

    Your blog is so useful-Loosening Fasteners … keep up the good work!!!!…

  25. szkolenia bhp says:
    March 21, 2011 at 1:57 am

    Very nice blog on Loosening Fasteners, gratulations

  26. easy url says:
    March 21, 2011 at 4:49 am

    thanx for such a fantastic blog on Loosening Fasteners. Where else could someone get that kind of info written in such a perfect way? I have a presentation that I am presently working on, and I have been on the look out for such info.

  27. plastyczny chirurg Kraków says:
    March 21, 2011 at 1:30 pm

    Thanks a lot for your challenge in addition to results! This stuff about loosening fasteners on your web page is usually terrific. At the same time When i really appreciate ones thoughts. In my position these include significant details. Nevertheless thank you. Superior look over.

  28. szkolenia bhp says:
    March 21, 2011 at 1:33 pm

    Generally I don’t read post on blogs, but I wish to say that this write-up forced me to do so! Your writing style has surprised me. Thanks, quite nice post on loosening fasteners.

  29. online pharmacy Cipro says:
    March 21, 2011 at 8:03 pm

    Thanks for taking the time to talk about stubborn nuts & bolts- Loosening Fasteners, I feel fervently about this and I take pleasure in learning about this topic. Please, as you gain information, please update this blog with more information. I have found it very useful.

  30. Allyn Stinehour says:
    March 21, 2011 at 9:47 pm

    Thanks a lot for the blog discussion on Loosening Fasteners.Really looking forward to read more. Really Cool.

  31. 6ft trampoline says:
    March 21, 2011 at 10:45 pm

    Useful info on Loosening Fasteners and excellent design you got here! I want to thank you so much for publishing your ideas and putting the time into the stuff you publish! Superb piece of work!

  32. Pamella Perrotta says:
    March 23, 2011 at 12:47 am

    I do really enjoy your blog. It makes me want to start my own blog but I do not know how so I think I will just keep stopping on by every now and then to look for new posts. Please keep it up, thank you! I love your blog.

  33. Josef Sarac says:
    March 29, 2011 at 6:25 pm

    Great post, you have some fantastic details on loosening fasteners, I at the same time believe this s an incredibly superb website.

  34. dofollow blog list txt says:
    March 29, 2011 at 8:06 pm

    There are a lot of things to learn in about loosening fasteners

  35. lames de terrasse bois says:
    March 30, 2011 at 1:13 am

    Howdie. This blog was totally fascinating, mainly because I was looking for ideas on stubborn nuts and bolts yesterday.

  36. window replace cost says:
    March 30, 2011 at 2:02 am

    what a useful article on loosening fasteners, i have never come across such a article ever before

  37. treatment of eye strain says:
    March 30, 2011 at 2:38 am

    loosening fasteners, amazing stuff in the article.. keep it up..

  38. cashloanpersonalz says:
    March 30, 2011 at 10:41 am

    hi everyone!! isn’t this a fabulous post on loosening fasteners.. i will keep visiting for more

  39. adult videos says:
    March 30, 2011 at 1:15 pm

    Thankyou for posting something generated in public interest.. dealing with stubborn nuts and bolts is a must read.

  40. Reviews says:
    March 31, 2011 at 3:07 am

    I enjoy your blog because of your hard work on this website. This is really kind of you to take up simple topics like stubborn nuts and bolts

  41. botox says:
    March 31, 2011 at 9:49 am

    Thanks a milion for your personal concern as well as initiatives! very good one about loosening fasteners

  42. polished stainless steel says:
    March 31, 2011 at 10:18 am

    Thanks for the recommendations shared on the blog it is very useful information on dealing with stubborn nuts and bolts.

  43. Kitty Whites says:
    March 31, 2011 at 11:29 am

    Do you accept guest posts? I’d love to write couple articles here. awesome post on loosening fasteners

  44. Andrew A. Sailer says:
    September 16, 2011 at 3:30 pm

    I feel like I discovered a dissolution to my problem. This text gave me important piece of advice. Because of this I enjoyed it.

Leave a Reply

You must be logged in to post a comment.